Difference between revisions of "Dish & Cup Rack"

From c34.org
Jump to navigation Jump to search
(New page: '''by Craig Illman, ''Espresso'' #1150''' ---- This rack was installed in the galley by a previous owner. It takes very little customization because it uses a rack made by AFI, a division...)
 
Line 8: Line 8:
 
While it doesn't appear that AFI makes this exact model anymore, they have others that are similar and possibly could be combined.
 
While it doesn't appear that AFI makes this exact model anymore, they have others that are similar and possibly could be combined.
  
[[Image:DishCupRack1.jpg]] [[Image:DishCupRack1.jpg]]
+
[[Image:DishCupRack1.jpg|600px]] [[Image:DishCupRack1.jpg|600px]]

Revision as of 02:23, 1 February 2009

by Craig Illman, Espresso #1150


This rack was installed in the galley by a previous owner. It takes very little customization because it uses a rack made by AFI, a division of Marinco. http://www.marinco.com/productline/exterior-teak

It attaches to the bulkhead between the galley and salon on the starboard side and is supported by a 1"x1" square teak pole on the port side that is curved on the bottom to match the fiddle and boxed at the cabintop.

While it doesn't appear that AFI makes this exact model anymore, they have others that are similar and possibly could be combined.

DishCupRack1.jpg DishCupRack1.jpg